Monday, September 27, 2010

The 1800s Optician Chair

The first actual purchase towards my new aesthetic was an opticians chair we found at a flea market in Springfield, OH. That was about 6 months ago, and I'm just now getting around to start working on it. Unemployment may have contributed to my newfound energy *shrugs*. So here's some pics. As near as we can figure it is an institutional model from the 1800's. It's made (or branded at least) by American Optical Company. It's not very ornate, however there are some chrome bits we've discovered underneath the paint some former owner added. The pneumatics all seem to work pretty well and it doesn't leak, which I understand is somewhat unusal. We thought maybe it was a dental or hairdressers chair until I found the tag under the paint. I scrubbed it with some Scotch-Brite type pads so I could read it.
I'll have to repaint it at some point so it doesn't rust.
We also found that the head rest and back didn't slid up and down as they should. It's taken quite a bit of work and liquid wrench to get the head rest part off and I'm still working on the back.

Interesting mechanism. There's a set-screw in the bottom of the piece, it put's adjustable amounts of pressure on a spring, which sets against a metal dowel. The dowel then pushes with more or less force on a horizontal dowel which lodges the headrest in place. A big lever (which I believe was chrome) pulls the horizontal dowel back down allowing the doctor to adjust the height. Of course, that all assumes that everything isn't coated in rust. Then the spring-loaded dowel, and the horizontal dowel, do not want to budge, causing much sweaty work for me.
I'm presuming the chair back is a similar design, but as it has a much longer track, it is much more difficult to budge. I'm afraid I've chipped the bottom of the part just a little trying to hammer it loose..

No comments:

Post a Comment